How to order a spare part without a 3D model

A broken clip, knob or cover does not necessarily need a 3D file. Here are four ways to a working spare part — starting with the quickest.

Updated · 2 min read

1. Look for a ready-made model

Many common parts, such as appliance knobs, furniture fittings, battery covers and cable holders, have already been modelled by someone. Search Printables, MakerWorld or Thingiverse by the name of the part and the make and model of the device, for example “dishwasher wheel Bosch”.

If you find a suitable model, upload the file and tell us what you need the part for. Before ordering:

  • compare the model's dimensions with your part — they are usually listed on the model page;
  • check that the model's licence allows printing it (for personal use it almost always does).

2. Send photos and measurements — we model it

If there is no ready-made model, most simple parts can be modelled from photos and measurements: brackets, mounts, holders, caps, covers and spacers. Send up to 3 photos and the main measurements in millimetres through the contact form.

To measure and photograph the part so it fits the first time, read the measuring guide.

3. Bring us the old part

If the part has a complicated shape or measuring it seems tricky, bring the old part to us in Rakvere, even if it is broken. We measure it ourselves and model a new one. Bring all the pieces — even a broken-off piece shows what the part originally looked like.

4. From a drawing

If you have a technical drawing or a hand sketch with dimensions, we model the part from it. A part made from a drawing is usually the most accurate, because all the dimensions are already there.

What the price depends on

The price of modelling depends on how complex the part is: a simple bracket or spacer is quick, a part with several pieces or moving parts takes longer. We tell you the price before we start — you only pay if it suits you. Printing is priced as usual by material and quantity. There is more on the 3D modelling page.

What to print the spare part in

  • PETG — appliances, furniture, kitchen and bathroom; withstands up to 70 °C.
  • ASA — car, outdoors and sunlight; withstands up to 100 °C and does not yellow in UV light.
  • PAHT-CF — the most heavily loaded and hottest places; withstands up to 190 °C.
  • TPU — flexible parts: seals, bumpers and feet.

We can print a part of up to 325 × 320 × 325 mm in one piece. Read more about materials in the material guide.