Which material should you choose for 3D printing?

The right material decides whether a part lasts for years or loses its shape on the first warm day in a car. Here is a short comparison and some rules of thumb.

Updated · 3 min read

In short

  • Indoors, decoration and prototypes → PLA
  • Everyday functional parts at home, in the kitchen and in the workshop → PETG
  • Outdoors, in a car and in sunlight → ASA
  • Flexible, rubber-like parts → TPU
  • Heavy loads and heat → PAHT-CF
Material Strength Heat resistance Flexibility Withstands
PLA Basic up to 55 °C
PETG Basic up to 70 °C
ASA up to 100 °C
TPU 95A HF up to 90 °C
PAHT-CF up to 190 °C
PPA-CF up to 220 °C

The properties in the table are rated on a scale of 1–5. The last column shows the temperature at which the part still keeps its shape.

PLA — the most common

PLA is stiff and accurate and gives a nice surface. It suits prototypes, models, decorations and indoor holders, and it comes in the most colours. Its weak point is heat: above 55 °C PLA starts to soften, so it is not for a car in summer or a sunny windowsill.

PLA also comes in special finishes: PLA Matte (matt surface), PLA Silk+ (gold and silver sheen), PLA Translucent (lets light through), PLA Glow (glows in the dark) and PLA Metal (metal-like surface).

PETG — the everyday functional part

PETG is tougher than PLA and does not break as easily. It withstands up to 70 °C as well as moisture and many chemicals, so it suits kitchens and bathrooms, appliance spare parts, mounts and enclosures. Clear PETG is also available.

ASA — for outdoors and cars

ASA is UV- and weather-resistant and does not yellow in the sun. It withstands up to 100 °C, which makes it suitable for car interiors, garden equipment, outdoor lights and anything that stays outside all year.

TPU — flexible

TPU 95A is rubber-like and elastic. It is used for seals, bumpers, furniture feet, protective cases and vibration dampers. TPU withstands up to 90 °C.

PAHT-CF — stiff and tough

PAHT-CF is a heat-resistant nylon reinforced with carbon fibre. It is very stiff and strong and withstands up to 190 °C, so it suits loaded mechanical parts, places near an engine, jigs and fixtures, and industrial mounts. As it is expensive, choose it when the other materials are not up to the job.

PPA-CF — the most heat-resistant

PPA-CF is a polyphthalamide reinforced with carbon fibre. It is even stiffer than PAHT-CF, withstands up to 220 °C and holds its dimensions in humid conditions. It suits engine-bay brackets and parts that sit close to heat. As it is the most expensive, we choose it when the part has to withstand high temperatures.

Strength is not just about the material

With the same material, strength also depends on the infill density, the number of walls and the orientation of the part in the printer. A part printed layer by layer is weaker between the layers than along them. When you order, describe how the part will be loaded, and we choose the settings accordingly.

If in doubt, try the material picker on the home page or see all materials and colours.