3D printing car parts

A broken clip, bracket or cover that is no longer sold, or costs far too much at the dealer? We print a new one in Rakvere from the old part, a photo or measurements, in a material that holds up in the cabin, under the car or in the engine bay.

What we print for cars

  • Clips and fasteners

    Underbody and door panel clips, plastic rivets, cable and hose holders. Small fasteners are worth printing a few spares of at once.

  • Brackets and holders

    Holders for sensors, extra lights, number plates and phones, and brackets, including in the engine bay. We replace a broken one or make one the car never had.

  • Covers, lids and knobs

    Pieces of interior panels, glovebox and console lids, switch knobs, caps and end covers, made from the old part or a photo.

  • Flexible parts in TPU

    Bumpers, vibration dampers, dust covers and seals in TPU, which gives like rubber and does not crack.

Material by location

For outdoors and heat

ASA

UV- and weather-resistant, handles up to 100 °C. Parts for cars, gardens and exterior walls.

Strength
Heat resistance
Flexibility
Withstands
up to 100 °C
Colours in stock

Most heat-resistant, up to 220 °C

PPA-CF

Carbon-fibre polyphthalamide: stiffer and more heat-resistant than nylon, and holds its dimensions in humid conditions. Engine-bay brackets and parts close to heat.

Strength
Heat resistance
Flexibility
Withstands
up to 220 °C
Colours in stock

Tough, up to 190 °C

PAHT-CF

Carbon-fibre nylon: very stiff and tough, withstands heat up to 190 °C. Gears, brackets, jigs and engine-bay parts.

Strength
Heat resistance
Flexibility
Withstands
up to 190 °C
Colours in stock

Flexible like rubber

TPU 95A HF

Shore 95A hardness. Gaskets, bumpers, feet and protective covers that need to give.

Strength
Heat resistance
Flexibility
Withstands
up to 90 °C
Colours in stock

How to order a car part

  1. 01

    Send photos and measurements

    Photograph the part from several angles with a ruler or caliper next to it. Add the make, model, year and where the part sits. The contact form takes up to 3 photos.

  2. 02

    We give you a price

    Within 1 working day you know whether the part can be printed, in which material and what it costs. The quote is free.

  3. 03

    We model and print

    If there is no 3D file, we model the part ourselves and send you a picture to approve. Only then do we print.

  4. 04

    We send it to you

    To a parcel locker anywhere in Estonia or for pickup in Rakvere. You can also bring the broken part to Rakvere and we measure it ourselves.

Frequently asked questions

Will a 3D-printed car part last?

Yes, if the material suits the location. Cabin and body parts are made of ASA, which withstands sunlight, frost and up to 100 °C. For the engine bay we use carbon-fibre PAHT-CF (up to 190 °C) and, for the hottest spots, PPA-CF (up to 220 °C). Tell us where the part sits and we recommend the material.

Which car parts do you not print?

Parts that safety depends on: brake, steering, suspension, seat belt and airbag components, and parts of the fuel and brake systems. Use an original or certified spare part for these.

I have no 3D model, only the broken part. Is that enough?

Usually, yes. Clips, holders and lids we model from photos and measurements. A more complex part you can bring to Rakvere. We tell you the modelling price before we start.

How large can the part be?

Up to 325 × 320 × 325 mm in one piece. A longer part, such as a trim strip, can be printed in sections and glued together.

Send a model or describe what you need

We review the file or idea and reply with a price and lead time within 1 business day. Nothing is paid until the price suits you.