Versatile and most affordable
PLA Basic
Accurate, stiff and clean-surfaced. Prototypes, decorative items and indoor parts.
- Strength
- Heat resistance
- Flexibility
- Withstands
- up to 55 °C
No 3D file? We make one. Send photos and measurements or a drawing, or bring us the old part — we model it, show it to you before printing and print it.
Brackets, mounts, holders, caps, covers and spacers can usually be modelled from a few photos and the main measurements.
A technical drawing (PDF) or a hand sketch with dimensions — a part modelled from a drawing is the most accurate.
Bring the broken or worn part to us in Rakvere. We measure it with callipers and model a new one — a stronger one if needed.
Found a model online that almost fits? We change the dimensions and add screw holes, mounts, text or a logo.
Versatile and most affordable
Accurate, stiff and clean-surfaced. Prototypes, decorative items and indoor parts.
Tough and moisture-proof
Tougher than PLA and unbothered by water. Working parts, mounts and anything that carries load.
For outdoors and heat
UV- and weather-resistant, handles up to 100 °C. Parts for cars, gardens and exterior walls.
Tough, up to 190 °C
Carbon-fibre nylon: very stiff and tough, withstands heat up to 190 °C. Gears, brackets, jigs and engine-bay parts.
The contact form takes up to 3 images. Add the measurements, where the part is used and how many you need.
We estimate the work and tell you the price for modelling and printing before we do anything.
We send you a picture of the model to approve. If something needs changing, we change it before printing.
The finished part goes to a parcel locker, or you collect it in Rakvere. If you like, you also get the model file.
It depends on the part: a simple bracket or spacer is quick, a part with several pieces or moving parts takes longer. We tell you the price before we start — you only pay if it suits you.
Photos from several angles (with a ruler or callipers next to the part), the main measurements in millimetres and a description of where the part is used and what it has to fit. The guide “How to measure and photograph a part” explains it in detail.
Yes. If you wish, we give you the model as an STL or STEP file so you can order the part again later.
A part modelled from measurements is as accurate as the measurements. FDM printing is accurate to about ±0.2 mm, and we build in the clearance that parts fitting together need. For critical parts we recommend printing one test piece before a larger batch.
We review the file or idea and reply with a price and lead time within 1 business day. Nothing is paid until the price suits you.